Large screen splicing in the current market, people are always not consciously put the ultra narrow LCD splicing and splicing out as compared to DLP. DLP rear projection has been dominated by the large screen splicing market half of the country in a very long period of time, with the LCD display market is growing day by day, be the first to bear the brunt of the traditional DLP rear projection splicing is a challenge. Especially in recent years, LCD and DLP two were achieved a major breakthrough in their respective fields, the market competition is more intense. Liquid crystal splicing and splicing of DLP rear projection PK, or what?

Who is the winner? LCD splicing and DLP rear projection PK

LCD and DLP rear projection in the technical aspects of the advantages and disadvantages of PK

Liquid crystal splicing is a splicing technology in recent years, the LCD LCD wall with low power consumption, light weight, long service life (usually work 50000 hours), no radiation, the advantages of uniform brightness. At present, the largest LCD unit can be up to 60 inches, which has the advantages of small volume, light weight, convenient installation, small footprint. But its biggest drawback is that can not be seamless, although through continuous efforts, the DID screen from the original 1-2 cm, reduced to 5.3 mm now, but the level is still not able to achieve a real sense of "seamless" joint requirements.

As the traditional DLP rear projection splicing splice products leader, with its perfect seam and screen high consistency and integrity, has been ranked in the high-end industry applications, can not shake the other mosaic products. In the LED back light source of DLP has a more excellent picture adjustability. On this basis, the joint DLP advantage is self-evident, the minimum can be controlled at 0.1mm, the maximum does not exceed 1mm. Of course, DLP splicing also has some disadvantages, such as low power consumption, high brightness, large volume, high cost of maintenance.

LCD and DLP rear projection in the industry application of the advantages and disadvantages of PK

Liquid crystal splicing wall thickness can be easily controlled in 20 to 30 cm, the thickness is 0.5 to 1 meters of DLP splicing technology incomparable. At the same time, makes the ultrathin liquid crystal splicing can be favorable to wall design and space, rather than substantial lordosis, the aesthetic advantage is enough to make it competitive with DLP splicing. In most of the commercial market, exhibition display application market and public space, space is not harmonious factor huge cost and visually, with the help of ultrathin liquid crystal splicing characteristics, won a DLP hard to squeeze the living space in these areas.

Compared with the traditional DLP products, LCD has a prominent advantage, it is can be arbitrary upside down position, rotation, by any of the horizontal, vertical and inclined angle connection. Although DLP splicing can be designed into a vertical, inclined to use products, Samsung LCD splicing but this will undoubtedly make the cost increase, affecting the market application and popularization of. It can be said that until now, the special angle of liquid crystal splicing is still the world.

Light liquid crystal splicing technology and traditional DLP splicing compare another big advantage is the high efficiency. It also determines the unit are more likely to achieve higher luminance of LCD display. At present, the highlight of the liquid crystal display is no longer what fresh technology, the domestic and international has several enterprises launch. Through the introduction of splicing technology, bright LCD in outdoor applications can solve the bottleneck of the formation of liquid crystal screen size, outdoor applications market is very considerable. In outdoor applications, ultra-thin LCD can also play a big advantage. For outdoor applications is hanging in the building outer wall. So the volume, weight and other indicators of unit thickness is more sensitive, this is also the DLP products in addition to brightness factors, another is difficult to enter the market reason for outdoor applications.

Liquid crystal display characteristics of a new application or cannot do without the liquid crystal cell and thin. Large screen splicing in the current market, people are always not consciously put the ultra narrow LCD splicing and splicing out as compared to DLP. DLP rear projection has been dominated by the large screen splicing market half of the country in a very long period of time, with the LCD display market is growing day by day, be the first to bear the brunt of the traditional DLP rear projection splicing is a challenge. Especially in recent years, LCD and DLP two were achieved a major breakthrough in their respective fields, the market competition is more intense. Liquid crystal splicing and splicing of DLP rear projection PK, or what?

Who is the winner? LCD splicing and DLP rear projection PK

LCD and DLP rear projection in the technical aspects of the advantages and disadvantages of PK

Liquid crystal splicing is a splicing technology in recent years, the LCD LCD wall with low power consumption, light weight, long service life (usually work 50000 hours), no radiation, the advantages of uniform brightness. At present, the largest LCD unit can be up to 60 inches, which has the advantages of small volume, light weight, convenient installation, small footprint. But its biggest drawback is that can not be seamless, although through continuous efforts, the DID screen from the original 1-2 cm, reduced to 5.3 mm now, but the level is still not able to achieve a real sense of "seamless" joint requirements.

As the traditional DLP rear projection splicing splice products leader, with its perfect seam and screen high consistency and integrity, has been ranked in the high-end industry applications, can not shake the other mosaic products. In the LED back light source of DLP has a more excellent picture adjustability. On this basis, the joint DLP advantage is self-evident, the minimum can be controlled at 0.1mm, the maximum is not